iPhone 6s Plus Update System reported an error of 4014. The fault was repaired perfectly after replacing Nand.
The screen of iPhone 6s Plus is not normal. It is found that it is caused by the compass chip pad corrode.PAD add solder, the function of changing compass chip returns to normal.
iPhone 6s Plus was started and Stuck on Apple logo was restarted. The CPU was re installed and the power was recovered. The fault was repaired.
iPhone 6s Plus water damage no booting was detected to be caused by fingerprint chip corrode Short circuit. The fault was repaired after replacement.
iPhone 6s Plus has no signal. After detection, it is found that this fault is caused by the damage of diversity receiving UDIVA_RF chip, and the fault is repaired after replacement.
iPhone 6S Plus mobile phone Won't Turn On is detected to be caused by an Capacitor. After replacement, the problem of Short circuit disappears and the fault is repaired.
The iPhone 6s Plus phone has no service, and it is found that it is a 2G power amplifier u2gpa_ The RF chip is burnt out, and the problem is repaired after replacement.
iPhone 6S Plus is called no sound, consuming fast, replacing the audio IC, the phone is normal, and it does not consume.
Mobile phone water damage Won't Turn On, the measurement found that corrode on the side of USB chip was serious. Take down the USB chip, and replace the USB chip with the solder ball corrode under PAD.
