The iPhone 6 is flooded and the black screen of the mobile phone doesn't respond. After testing, it is found that it is caused by the damage of u2402. After replacement, the fault is repaired.
iPhone 6 has no sound. The flying cable connects the feet of large and small audio, and repairs the fault after replanting the WiFi chip.
The iPhone 6 mobile phone SIM cannot be read. It is detected that the baseband is broken, and the final machine cannot be repaired.
iPhone 6 screen failure, black Touch to touch the IC weld dot soldering, the flying line is normal.
iPhone 6 AUDIO CODEC IC corrode is damaged and there is no sound on the call. After replacing the AUDIO CODEC IC chip, the call is normal.
IPhone 6 power supply disconnection caused the phone to press the start button did not respond,Reballing Nand, clean solder beads, boot normal.
IPhone6 motherboard disconnected caused the phone WiFi to fail to open, one Jump wire,WiFi is normal.
iPhone 6 single-board reset short circuit causes the phone boot screen without displaying, replacing the USB chip fix.
iPhone 6 screen failure, after the test, the problem is replaced, and the problem is repaired.
