Category Blog

Repair of HP G6 notebook without startup

IMG_264
Lay down the chip value and find that several pin values are abnormal. Measuring the upper and lower tubes shows that the extreme values of G and S of the upper tube are 50. Replace the chip and the upper tube. Power-on standby is normal again, 0.014A triggers 0.073A is normal, the machine is powered on, the machine is turned on perfectly, the fault is eliminated, and the maintenance is over

Mine card P106 short circuit repair

IMG_259
Mine card P106 was short circuited. Because the 5V feedback resistor was knocked off, the feedback was abnormal. Then the 5V chip generated 12V, which damaged the core power supply composite tube and pex power supply chip. The chip fault was repaired.